怎么用这一套
全部型号
型号参数表
点击表头可排序
← 左右滑动查看完整参数 →
| 型号 | 名称 | 安装方式 | 尺寸 | 颜色 |
|---|
安装孔位说明
孔距是镜背安装的必问项。未拿到确认数据的型号，我们标注待确认，不填估算值。
孔距怎么定
镜背类产品的孔位要与镜面玻璃的安装位对齐。选型时先给镜面玻璃的孔位图，我们按图核对匹配；图上没有的规格，我们标「待确认」并直接问询确认，不用估算值代替。
为什么这页不直接给一张孔位图
不同型号的孔位不一样，图册给的是逐型号口径。在拿到你关心的具体型号前，笼统给一张图反而容易装错。所以这里给的是取数方式：按型号查、按图核对、不确认就问。
需要什么才能给准确孔位
① 型号 ② 镜面玻璃的孔位图或孔距实测值 ③ 镜门厚度。给齐这三项，我们回可装配的孔位方案。
How hole spacing is decided
Mounting holes on mirror-back products must align with the fixing positions in the mirror glass. Send us the hole drawing of the glass and we will verify the match. Anything not on the drawing is marked to be confirmed and asked about directly — never estimated.
Why there is no single hole diagram on this page
Hole positions differ per model, and our catalog states them model by model. A generic diagram before we know your model would more likely cause a mis-fit than prevent one. So we give you how to obtain it: look it up by model, verify against the drawing, and ask when it is not confirmed.
What we need for an accurate answer
① The model ② The hole drawing or measured hole spacing of the mirror glass ③ The door thickness. With all three we reply with an assemblable hole plan.